Speedy Green Energy Co.,Ltd
info@speedy-energy.com+86-20-28679525

Polycrystalline Solar Module

Type: high efficiency polycrystalline solar module 250W~330W
Purpose: residential or commercial power plant
Models for choice:
60 pcs – 4 bus bars (250W~280W),
72 pcs – 4 bus bars (300W~330W)

  • The Balance between Cost and Efficiency 

    Besides monocrystalline solar modules, SPEEDY offers high quality polycrystalline solar modules as well. The efficiency of our polycrystalline is even higher than the monocrystalline modules from other suppliers, but the cost is lower.  Normally there are different requirements for cost and efficiency for different projects. For a bidder or an installer, it is easy to find out a suitable solution by our various models with different power, efficiency and cost.  

    Benefits for You

    Various models for choice, power output from 250W to 330W

    Certificated by TUV and ETL testing organization under extreme conditions

    Good performance under weak light, which has been tested and approved by third-party.

    Guarantee from 0 to +6W as power tolerance, customers can get up to 5.8% power more than declared output.

    100% EL test to make sure higher quality.

    Pass the Salt-mist Corrosion Test, Fire Test, Ammonia Test, Potential Induced Degradation (PID) Test and

       Carbon Footprint assessment in TUV.

    PVTeach‘s Linear Performance Warranty

    For a period of 25 years commencing on the Warranty Start Data, loss of power output of the normal power output at Standard Test Conditions (STC) for the product(s) shall not exceed:

    1. For polycrystalline products: 2% in the first year, thereafter 0.67% per year, ending with 82% in the 25th year after the Warranty Start Date.

    2. For monocrystalline products: 3% in the first year, thereafter 0.67% per year, ending with 81% in the 25th year after the Warranty Start Date.

    The Warranty Start Date should be defined as the date of than Bill of Lading Date.

  • Poly-Crystalline Solar Modules AAAS2-60 (AAA=250W~280W)

    Typical Electrical   Characteristics

    Solar cells

    Poly-Crystalline 156*156mm, 60pcs (6*10) –   4 bus bars

    Max-power

    250Wp

    255Wp

    260Wp

    265Wp

    270Wp

    275Wp

    280Wp

    Power Tolerance

    0 ~ +6W

    Voltage at Pmax (Vmp)

    30.0V

    31.1V

    31.3V

    31.5V

    31.7V

    31.9V

    32.1V

    Current at Pmax (Imp)

    8.09A

    8.20A

    8.31A

    8.41A

    8.52A

    8.62A

    8.73

    Open-Circuit Voltage (Voc)

    37.7V

    37.9V

    38.2V

    38.4V

    38.7V

    38.9V

    39.1V

    Short-Circuit Current (Isc)

    8.76A

    8.87A

    8.99A

    9.10A

    9.22A

    9.33A

    9.45A

    Max-System Voltage

    1000V(IEC),   600V(UL)

    Cell Efficiency

    17.3%

    17.6%

    17.9%

    18.2%

    18.5%

    18.8%

    19.0%

    Module Efficiency

    15.4%

    15.7%

    16.0%

    16.3%

    16.6%

    16.9%

    17.2%

    Number of Bypass Diodes (psc)

    3

    Max. Series Fuse (A)

    15A

    Temperature Coefficient of   Pmax

    -0.45%/

    Temperature Coefficient of Voc

    -0.34%/

    Temperature Coefficient of Isc

    -0.05%/

    Normal Operating Cell Temperature

    45 + 2

    Mechanical Characteristics

    Cable Type

    Cross section = 4mm2,   Length=900 + 5mm

    Type of Connector

    Compatible type   MC4

    Dimensions

    1640*992*45/40/35mm

    Weight

    18.3/18.0/17.7kg

    Construction

    Glass: High transmission & Low iron   tempered glass, thickness=3.2mm

    Encapsulation: EVA

    Back side: white

    Junction Box

    IP67 rated

    Frame

    Clear anodized aluminum alloy type 6063T5   frame

    Qualification Test Parameters

    Dielectric Insulation Voltage

    6000VDC max

    Operating Temperature

    -40 ~ +85

    Max Load

    5400Pa

    Hailstone Impact

    25mm (1 inch) at   23m/s (52mph)

    Fire Rating

    Class C

    *STC Conditions (1000W/m2, 1.5AM and 25 cell temperature)


    Poly-Crystalline Solar Modules AAAS2-72 (AAA=300W~330W)

    Typical Electrical   Characteristics

    Solar cells

    Poly-Crystalline 156*156mm, 60pcs (6*10) –   4 bus bars

    Max-power

    300Wp

    305Wp

    310Wp

    315Wp

    320Wp

    325Wp

    330Wp

    Power Tolerance

    0 ~ +6W

    Voltage at Pmax (Vmp)

    36.7V

    36.8V

    36.9V

    37.0V

    37.1V

    37.2V

    37.3V

    Current at Pmax (Imp)

    8.17A

    8.29A

    8.40A

    8.51A

    8.63A

    8.74A

    8.84A

    Open-Circuit Voltage (Voc)

    45.0V

    45.1V

    45.2V

    45.3V

    45.4V

    45.5V

    45.6V

    Short-Circuit Current (Isc)

    8.79A

    8.97A

    9.09A

    9.21A

    9.33A

    9.46A

    9.55A

    Max-System Voltage

    1000V(IEC),   600V(UL)

    Cell Efficiency

    17.3%

    17.6%

    17.9%

    18.2%

    18.5%

    18.8%

    19.0%

    Module Efficiency

    15.5%

    15.7%

    16.0%

    16.3%

    16.5%

    16.8%

    17.0%

    Number of Bypass Diodes (psc)

    3

    Max. Series Fuse (A)

    15A

    Temperature Coefficient of   Pmax

    -0.45%/

    Temperature Coefficient of Voc

    -0.34%/

    Temperature Coefficient of Isc

    -0.05%/

    Normal Operating Cell Temperature

    45 + 2

    Mechanical Characteristics

    Cable Type

    Cross section = 4mm2, Length=1000   + 5mm

    Type of Connector

    Compatible type   MC4

    Dimensions

    1956*992*50/45mm

    Weight

    22.5/21kg

    Construction

    Glass: High transmission & Low iron   tempered glass, thickness=3.2mm

    Encapsulation: EVA

    Back side: white

    Junction Box

    IP67 rated

    Frame

    Clear anodized aluminum alloy type 6063T5   frame

    Qualification Test Parameters

    Dielectric Insulation Voltage

    6000VDC max

    Operating Temperature

    -40 ~ +85

    Max Load

    5400Pa

    Hailstone Impact

    25mm (1 inch) at   23m/s (52mph)

    Fire Rating

    Class C

    *STC Conditions (1000W/m2, 1.5AM and 25 cell temperature)


Feedback
Feedback
Your comments are welcome!
For more information about our brand and products, please feel free to contact us!
Please enter your email address:
Contact Us
Address: 2/F, B Area, No. 6, East Xinji Road, Nancun Town, Panyu District, Guangzhou, China
Tel: +86-20-28679525
Fax: +86-20-28679529
E-mail: info@speedy-energy.com
Copyright © Speedy Green Energy Co.,Ltd All rights reserved.